Samsung Q1 用户手册
Using Samsung Network Manager 58
Using the network after moving location
By setting the network settings (IP address, printer setting, etc.) for each location, you can imme-
diately access the network without performing the network setting procedures regardless of your
location.
diately access the network without performing the network setting procedures regardless of your
location.
1
Run Samsung Network Manager when connected to the Internet.
2
Select an icon that represents the corresponding location from the Saved Locations window and
then click Move.
then click Move.
3
When the network settings of the selected location are applied, the new location and the net-
work connection information are displayed in The detailed Information for window.
work connection information are displayed in The detailed Information for window.
Sharing Internet Access
This section describes the procedures to share Internet Access.
To share Internet Access, you first have to set a sharing server and a sharing client. When the setup
is complete, you can access the Internet from the sharing client by connecting to the sharing server.
To share Internet Access, you first have to set a sharing server and a sharing client. When the setup
is complete, you can access the Internet from the sharing client by connecting to the sharing server.
Sharing Server : A computer with a direct connection to the internet and a local network con-
nection.
Sharing Client : A computer that uses the Internet by connecting to a sharing server without
itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows. (See Figure 5 on
nection.
Sharing Client : A computer that uses the Internet by connecting to a sharing server without
itself having a direct connection to the Internet.
You can connect a sharing server and a sharing client as follows. (See Figure 5 on
To use a wired LAN, connect the LAN cable to the LAN port and turn the wired LAN on, if it is
turned off.
Press the Menu button and click the Wired LAN ON item to turn it on.
To use a wireless LAN, you have to turn it on, if it is turned off.
Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless
LAN is turned on, the Wireless LAN LED ( ) lights up.
For Connection 2, 3: To connect a sharing server and a sharing client using a wired LAN, con-
nect the computers with a crossover LAN cable or network hub first.
For Connection 3: You have to connect a LAN card in advance.
turned off.
Press the Menu button and click the Wired LAN ON item to turn it on.
To use a wireless LAN, you have to turn it on, if it is turned off.
Press the Menu button and click the Wireless LAN ON item to turn it on. When the wireless
LAN is turned on, the Wireless LAN LED ( ) lights up.
For Connection 2, 3: To connect a sharing server and a sharing client using a wired LAN, con-
nect the computers with a crossover LAN cable or network hub first.
For Connection 3: You have to connect a LAN card in advance.
As an example, Internet sharing procedures for [Connection 1], which connect the sharing server
and the Internet through a wired LAN and connect the sharing server and the sharing client through
a wireless LAN, are described below.
and the Internet through a wired LAN and connect the sharing server and the sharing client through
a wireless LAN, are described below.
Sharing Server
Sharing Client
External Internet Device
Client Device
Connection 1
Wired LAN
Wireless LAN
Wireless LAN
Connection 2
Wireless LAN
Wired LAN
Wired LAN
Connection 3
Wired LAN
Wired LAN
Wired LAN