Seagate ST1500DM003 用户手册
14
Barracuda SATA Product Manual, Rev. D
Drive Specifications
* All specifications above are based on native configurations.
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels.
2.2
Formatted capacity
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
2.2.1 LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where
n is the number of guaranteed sectors as defined above.
n is the number of guaranteed sectors as defined above.
See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit
addressing support of drives with capacities over 137GB.
addressing support of drives with capacities over 137GB.
Non-Operational Shock (max)
350 Gs at 2ms
350 Gs at 2ms
350 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs, Limited displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle***
2.2 bels (typical)
2.3 bels (max)
2.3 bels (max)
2.2 bels (typical)
2.3 bels (max)
2.3 bels (max)
2.2 bels (typical)
2.3 bels (max)
2.3 bels (max)
Seek
2.3 bels (typical)
2.4 bels (max)
2.4 bels (max)
2.3 bels (typical)
2.4 bels (max)
2.4 bels (max)
2.3 bels (typical)
2.4 bels (max)
2.4 bels (max)
Non-recoverable read errors
1 per 10
14
bits read
1 per 10
14
bits read
1 per 10
14
bits read
Warranty
To determine the warranty for a specific drive, use a web browser to access the following web page:
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial
number, model number (or part number) and country of purchase. The system will display the warranty
information for your drive.
number, model number (or part number) and country of purchase. The system will display the warranty
information for your drive.
Contact start-stop cycles
50,000 at 25°C, 50% rel.
humidity
humidity
50,000 at 25°C, 50% rel.
humidity
humidity
50,000 at 25°C, 50% rel.
humidity
humidity
Supports Hotplug operation
per the Serial ATA Revision 3.0
specification
per the Serial ATA Revision 3.0
specification
Yes
Yes
Yes
Model
Formatted
capacity*
capacity*
Guaranteed
sectors
sectors
Bytes per sector
ST3000DM001
3000GB
5,860,533,168
4k
ST2000DM001
2000GB
3,907,029,168
ST1500DM003
1500GB
2,930,277,168
ST1000DM003
1000GB
1,953,525,168
ST750DM003
750GB
1,465,149,168
ST500DM002
500GB
976,773,168
ST320DM000
320GB
625,142,448
ST250DM000
250GB
488,397,168
Table 2 Drive specifications summary for 500GB, 320GB and 250GB models (continued)
Drive Specification*
ST500DM002
ST320DM000
ST250DM000