Seagate ST5000VX0001 用户手册

*All specifications above are based on native configurations.

** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating

environment and formatting.

* ** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power to operational levels.

Wet bulb temperature (max)

37.7°C max (operating)

40.0°C max (nonoperating)

Altitude, operating

–304m to 3048m

(–1000 ft to 10,000 ft)

Altitude, non-operating 

(below mean sea level, max)

–304m to12,192m

(–1000ft to 40,000+ ft)

Operational shock (max)

70 Gs at 2ms (read)

40 Gs at 2ms (write)

Non-operational shock (max)

300 Gs at 2ms

Vibration, operating

2Hz to 22Hz: 0.25 Gs, Limited displacement

22Hz to 350Hz: 0.50 Gs

350Hz to 500Hz: 0.25 Gs

Vibration, non-operating

5Hz to 22Hz: 3.0 Gs

22Hz to 350Hz: 3.0 Gs

350Hz to 500Hz: 3.0 Gs

Drive acoustics, sound power

Idle***

2.5 bels (typical)

2.6 bels (max)

Seek

2.6 bels (typical)

2.7 bels (max)

Non-recoverable read errors

1 per 10

15 

bits read

Mean Time Between Failure (MTBF)

1,000,000 hrs

Warranty

To determine the warranty for a specific drive, use a web browser to access the following 
web page: 

http://www.seagate.com/support/warranty-and-replacements/

From this page, click on “Check to see if the drive is under Warranty”. Users will be asked 
to provide the drive serial number, model number (or part number) and country of 
purchase. The system will display the warranty information for the drive.

Load/unload cycles (25°C, 50% rel. humidity)

600,000 at 25°C, 50% rel. humidity 

Supports hotplug operation per the 
Serial ATA Revision 3.0 specification

Yes