Maxtor 10K III 用户手册

下载
页码 284
SCSI Description
Maxtor Atlas 10K III
5-99
02h
Release
A PERSISTENT RESERVATION OUT command with Release service action re-
moves a persistent reservation held by the same initiator.
The fields associated with a Release service action match fields of the active 
persistent reservation. Sending of a PERSISTENT RESERVATION OUT com-
mand that specifies a Release service action when no persistent reservation ex-
ists from that initiator does not result in an error. Instead, the device server 
returns a GOOD message without altering any other reservation: the reserva-
tion key is not changed by the Release service action.
The device server returns a CHECK CONDITION status for any PERSISTENT 
RESERVATION OUT command that specifies the release of a persistent reser-
vation held by the requesting initiator that matches some but not all of the 
Scope, Type, Reservation Key, and extent values. The sense key is set to ILLE-
GAL REQUEST and additional sense data is set to INVALID RELEASE OF AC-
TIVE PERSISTENT RESERVATION. Attempts to release persistent reservations 
in which none of the Scope, Type, Reservation Key, and extent values match 
an existing persistent reservation held by the initiator making the request are 
not errors.
An active persistent reservation may also be released by:
1. Powering off. When the most recent APTPL value received by the device 
server is 0, a power-off performs a hard reset, clears all persistent reservations, 
and removes all registered reservation keys; 
or
2. Executing a PERSISTENT RESERVATION OUT command from another initi-
ator with a persistent reserve service action of Pre-empt or Pre-empt and Clear.
Note that a Release service action should not be performed if any operations 
interlocked by the persistent reservation have not yet completed.
03h
Clear
A PERSISTENT RESERVATION OUT command with a successful Clear service 
action removes all persistent reservations for all initiators. All reservation keys 
are also removed. Any commands from any initiator that have been accepted 
by the device server as non-conflicting continue their normal executions.
A UNIT ATTENTION condition is established for all initiators for the cleared log-
ical unit. The sense key is set to UNIT ATTENTION; the additional sense data 
is set to RESERVATIONS PREEMPTED.
Note that applications should not use the Clear action service except during re-
coveries associated with initiator or system reconfiguration, since data integrity 
may be compromised.
+,
9
"()**+