Seagate 545XE 用户手册

下载
页码 32
Maintenance and repair. Seagate drives do not require mainte
-
nance. The head/disc assembly is factory-sealed; a broken seal
voids  the  warranty.  Seagate  customer  service  centers  are the
only facilities authorized to repair Seagate drives. Seagate does
not sanction any third-party repair facilities. 
Note. Throughout this manual, the Medalist 275xe is referred to
by its model number, ST3295A, and the Medalist 545xe is
referred to by its model number, ST3660A.
ST3660A free installation software
Files  containing  the  free  hard  disc  installation  software  and  a
program  for  extracting  them,  Seamove,  are  written  on  the
ST3660A  drive  at  the  factory.  The  installation  software  is  a
version of EZ-Drive
 for Seagate. It provides a software solution
for computers using DOS and some BIOS combinations that limit
the hard disc capacity to 528 Mbytes. It allows the computer to
access the ST3660A’s entire 544.8 Mbytes. Before you partition
and  format  the  drive,  transfer  the  EZ-Drive  files  to  a  bootable
diskette.  Instructions  for  transferring  the  EZ-Drive  files  are  on
page 11 and in the README.EXE file on the drive.
Note. The  EZ-Drive software  is authorized  for installation  only
with the drive on which it is shipped.
Quick software transfer
Install the ST3660A drive.
Boot the computer with a diskette that has 300 Kbytes avail-
able for transferring the files.
Select drive type 2 for the ST3660A in CMOS.
Activate the prompt for the ST3660A.
Type seamove. Seamove transfers the files to the diskette in
Drive A, erases the drive partition and reboots the computer.
2
Medalist XE Family Installation Guide, Rev. A