HP (Hewlett-Packard) 1900ux 用户手册

Navigation

35

5. Press NEXT or PREV until the third number of your password displays and 

then press ENTER. 

TEST *

 displays, indicating that the password was 

accepted. You are now in the menu tree below 

ADMIN*

.

Changing the administration menu password

READY

>

ADMIN*

>

PSWD 000 000 000

>CONFIG*

To protect the system from unauthorized access, change the password from the 
factory default setting:

1. With 

READY

 displaying on the control panel, press NEXT until 

ADMIN*

 

displays, then press ENTER and enter the password.

2.

TEST *

 displays, indicating that the password was accepted. Press NEXT 

until 

CONFIG *

 displays and then press ENTER.

3. Press NEXT or PREV or until 

NEW PASSWORD

 displays and then press 

ENTER.

4.

NEW

 

000

 

000

 

000

 displays and the first set of three zeros flashes. Press 

NEXT or PREV until the new number you want to assign to the first part of 
the password displays and then press ENTER. The second set of three zeros 
flashes.

5. Press NEXT or PREV until the new number you want to assign to the second 

part of the password displays and then press ENTER. The third set of three 
zeros flashes.

6. Press NEXT or PREV until the new number you want to assign to the third 

part of the password displays and then press ENTER.

7.

PASSWORD

 

CHANGED

 displays. Press CANCEL three times to return to 

READY

.

8. Power off the jukebox, then power it back on to save the password to the 

jukebox flash ROM.

Note:  

Be sure to document your new password. If you forget it, contact your service 

representative to reset the security code to the factory default.