Fujitsu DX80 S2/DX90 S2 用户手册
Chapter 3 Initial Setup
3.1 Initial Setup 1
3.1 Initial Setup 1
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED
P2X0-1090-10ENZ0
39
3.1
Initial Setup 1
The flow of wizard operations in Initial Setup 1 is shown below.
(1) Set Storage Name
Register the name, administrator, and installation site of the ETERNUS DX Disk storage system. Refer to
for details.
(2) Set Date and Time
Set the date/time and time zone (storage system location) of the internal clock in the ETERNUS DX Disk
storage system. Refer to
storage system. Refer to
for details.
(3) Change Password
Change the password for the default account that is currently logged in before starting to use the ETERNUS
DX Disk storage system. Refer to
DX Disk storage system. Refer to
for details.
(4) Register Thin Provisioning License
If using the Thin Provisioning function, register the license here. Refer to
for details.
(5) Register Copy License
If using the Advanced Copy function, register the license here. Refer to
for details.
(6) Register SED Authentication Key
Register the Self Encrypting Drive (SED) authentication key to enable the encryption function of the SED.
Refer to
Refer to
for details
(7) Set Network Environment
Set the environment for the ETERNUS DX Disk storage system to communicate on the network such as IP
address and subnet mask. Refer to
address and subnet mask. Refer to
for details.
Log out when the settings are complete. Log in again, and then proceed to
.
If SED has been installed before registering the SED authentication key, reboot the ETERNUS DX Disk storage
system before logging in again.
system before logging in again.