Toshiba MK3019GAX 用户手册

3 

Placing Hard Drive inside your Computer   

•  Determine mounting configuration (the drive can be mounted in either a horizontal or vertical 

orientation)  

•  Configure drive for system application.  
•  Configure the adapter board for the specific system application (if required).  
•  Install adapter board into an unused PC/AT 16 bit slot (if required).  
•  Install the I/F cable to the system's 44 pin connector port or adapter board. Ensure pin 1 is 

oriented correctly, (pin 1 on the cable is usually identified by a red or blue strip.)  

•  Set correct drive type in system CMOS  
•  Refer to applicable manuals for software installation instructions.  

 

 Important Note: Disconnect power from your computer system before beginning installation.