Apple 13-0010--001 用户手册

下载
页码 328
ELITE SERIES USER MANUAL
INSTALLATION
1.     INSTALLATION
1.1.
Unpacking
During unpacking, care should be taken to ensure 
that all tools are nonmaqnetic and do not in-
flict damage to the unit. Carefully unwrap the 
package and save the material which will be 
useful in the future for protection during stor-
age or travel.
Before attempting to use an Elite disk drive, 
check for a protective shipping diskette inside 
the drive. Elite One drives do not require a 
protective diskettes, so were may or may not be 
one in the drive.
NOTE: Before connecting or disconnecting ANY 
e q u i p m e n t  TURN OFF A L L  COMPUTER AND PERIPHERAL 
POWER.
1 . 2 .
C o n n e c t i n g   D r i v e   C a b l e s
A flat ribbon cable is already connected to your 
Elite Series or Disk II disk drive(s). The   
other end of these cables must be connected to 
your disk controller card. For you first drive, 
connect the drive to the upper set of pins. Be 
sure to orient pin one on the connector with pin 
one on the controller- card, Pin one on the 
connector is marked with a small arrow, Pin one 
on the controller card is numbered.
If this connection is incorrectly made, consid-
erable damage may be done to the electronics of
Page 1-1