Sony SAC7000 用户手册

To show or hide the Faders control region, click the Faders button in the View pane. 

Select the Arm for Record buttons 

 on the tracks where you want to record. Arming a track enables it for recording. 

When a track is armed, the track meter displays the track’s level. If input monitoring is not on, the meter displays the level of your input 
source. If input monitoring is turned on, the meter shows the level of the input source plus the track effects chain. 

Click the Input Monitor Mode button 

 and choose a command from the menu. 

To turn on input monitoring, click the Input Monitor Mode button 

and choose and then choose Input Monitor Mode: On 

or 

 from the menu. During recording, your signal will be played back with the current track effects chain, but 

a dry (unprocessed) signal is recorded. 

When Input Monitor Mode: On

 is selected, the behavior is similar to Input Monitor Mode: Auto mode, but you will always hear the 

input monitor during recording—monitoring is not toggled on and off when recording in to a selected event. 

When Input Monitor Mode: Auto 

is selected, you will hear the input monitor signal when playback is stopped and during recording. 

If you’re recording into selected events, you’ll hear the input monitor signal only when the cursor passes over the selected events. 

When the Faders control region is visible, each track displays a Pan slider and a Volume fader.

|

 CHAPTER 10