National Instruments 321042A-01 用户手册

This manual is organized as follows:

•

Chapter 1, Introduction , explains how to use this manual, lists what you need to get
started, and briefly describes the STD-GPIB and the NI -488.2 software.

•

Chapter 2, Hardware  Configuration and Installation , contains instructions to help
you configure and install your STD-GPIB.

•

Chapter 3, Software  Installation and Configuration , contains instructions to help you
install and configure your NI-488.2 software.

•

Chapter 4,  Installation Verification and Troubleshooting, describes how to verify the
hardware and software installation and how to troubleshoot problems.

•

Chapter 5,  Using Your NI-488.2 Software, introduces the Win16 Interactive Control
utility and lists some programming considerations.

•

Appendix A, Hardware  Specifications, describes the characteristics of the
STD -GPIB and the re commended operating conditions.

•

Appendix B,  Interrupt Routing, contains useful information for you if you want to
configure the interrupt lines for an STD/STD32 computer not manufactured by
WinSystems or Ziatech, or a computer that is not AT-compatible.

•

Appendix C,  Customer Communication, contains forms you can use to request help
from National Instruments or to comment on our products and manuals.

•

The Glossary contains an alphabetical list and a description of terms used in this
manual, including abbreviations, acronyms, metric prefixes, mnemonics, and
symbols.

The following conventions are used in this manual.

Bold text denotes menus, menu items, dialog buttons, or
options.

Italic text denotes emphasis, a cross reference, or an
introduction to a key concept.

Bold italic text denotes a note, caution, or warning.