Motorola ATCA-717 用户手册
Ordering Information
Introduction
PENT/ATCA−717
33
Ordering Information
When ordering the board variants, upgrades and accessories, use the order numbers
given below.
given below.
Product Nomenclature
In the following you find the key for the product name extensions.
aa
PENT/ATCA−717/xx−yyyy
aa
xx
Main memory in GByte
yyyy
CPU frequency in MHz
Order Numbers
The table below is an excerpt from the blade’s ordering information. Ask your local
Motorola representative for the current ordering information.
Motorola representative for the current ordering information.
aaaa
Note:
a
This manual describes the blades listed below (PCA revision 1.3) and is
delivered with these blades. For blades with other PCA revisions refer to the manuals
that are delivered with those blades.
that are delivered with those blades.
a
Table 2:
Ordering Information
Order Number
PENT/ATCA−717/
Description
123065
2G−1800
Two GByte main memory, 1800 MHz CPU
frequency; (PCA revision 1.3)
frequency; (PCA revision 1.3)
aa
123066
4G−1800
Four GByte main memory, 1800 MHz CPU
frequency; (PCA revision 1.3)
frequency; (PCA revision 1.3)
The table below is an excerpt from the blade’s accessories ordering information. Ask your
local Motorola representative for the current ordering information.
local Motorola representative for the current ordering information.
aaaa
Table 3:
Accessories Ordering Information
Order Number
Accessory
Description
123036
ACC/ARTM−717
Rear transition module for
PENT/ATCA−717 blades
PENT/ATCA−717 blades
a
Provides access to four serial interfaces
deriving from PMCs as well as two USB
2.0, two serial, two SATA and one
keyboard/mouse interface; supports
PPMC−280 modules installed on the
PENT/ATCA−717
deriving from PMCs as well as two USB
2.0, two serial, two SATA and one
keyboard/mouse interface; supports
PPMC−280 modules installed on the
PENT/ATCA−717
120980
ACC/ATCA−715/HDD
Parallel ATA hard disk