Motorola ATCA-717 用户手册
On−Board Hardware Accessories
Installation
PENT/ATCA−717
49
Hard Disk
The blade allows to install one 2.5" hard disk which may be connected to either an
on−board parallel or serial Advanced Technology Attachment (ATA) interface connector.
The hard disk can be mounted directly on the blade without the need for an additional
wire.
on−board parallel or serial Advanced Technology Attachment (ATA) interface connector.
The hard disk can be mounted directly on the blade without the need for an additional
wire.
aaa
Figure 5:
Location of On−Board Hard Disk
The serial ATA interface supports up to 150 MByte/s data transfer rate and the parallel
ATA supports all PIO and DMA modes up to Ultra ATA100. Hard disks which are
connected to the parallel ATA interface act as master.
ATA supports all PIO and DMA modes up to Ultra ATA100. Hard disks which are
connected to the parallel ATA interface act as master.
a
Two hard disk accessory kits are available for the blade. One is called
ACC/ATCA−715/HDD and contains a parallel ATA hard disk drive. The second is called
ACC/ATCA−715/HDD−SATA and contains a serial ATA hard disk drive.
ACC/ATCA−715/HDD and contains a parallel ATA hard disk drive. The second is called
ACC/ATCA−715/HDD−SATA and contains a serial ATA hard disk drive.
a
Installing a Hard Disk