Motorola ATCA-717 用户手册

The blade provides an on−board configuration switch that allows to clear the blade’s
CMOS and thus to restore the BIOS default settings. In order to restore the BIOS default
settings using this switch, you have to proceed as follows.

aa

1.

Remove the blade from the system

See

a

a

 for the exact procedure

2.

Set the on−board switch SW2−3 to ON

See

a

 for the exact location of SW2−3

3.

Install and power up the blade

See

a

a

 for the exact procedure.

a

Note that the blade will not boot, because the "Clear CMOS RAM" switch SW2−3 is
set to ON.

a

4.

Remove the blade from the system again

See

a

a

 for the exact procedure

5.

Set switch SW2−3 to OFF

Now the BIOS default settings are restored.

a