Cisco Systems AIRCAP1552HAK9 用户手册

下载
页码 164
 
2-2
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 2      Installing the Access Point
  Unpacking the Access Point
Unpacking the Access Point
When you are unpacking the access point, do not remove the foam blocks attached to the antenna 
connectors. The foam protects the antenna connectors during installation.
To unpack the access point, follow these steps:
Step 1
Open the shipping container and carefully remove the contents. 
Step 2
Return all packing materials to the shipping container, and save it.
Step 3
Ensure that all items listed in 
 are included in the shipment. If any item is damaged 
or missing, notify your authorized Cisco sales representative. 
Package Contents
The typical access point package contains the following items:
Access point 
Cisco product documentation and translated safety warnings
Three liquid-tight adapters 
Two-pin DC power connector
Ground lug (Panduit PLCD6-10A-L) and screws with lock washers
Watertight cable glands for Power-over-Ethernet (PoE) ports (depending on the 1552 access point 
model, 2 or 3 cable glands are provided)
Tools and Hardware
The tools and hardware used to install the 1552 access point are described in:
Optional Tools and Hardware
The optional tools and hardware that can be obtained from Cisco are:
Optional power injector (AIR-PWRINJ1500-2=)
Optional AC power cord
40-ft (12.2-m) power cord with North American plug (AIR-CORD-R3P-40NA=) for light pole 
installations in the US and Canada
AC power cord, 40 ft (12.2 m) with European unterminated end (AIR-CORD-R3P-40UE=) for 
light pole installations outside of the US and Canada