APC AP7900 用户手册

For you to be able to use FTP to upgrade a 

single Switched Rack PDU over the network:

• The Switched Rack PDU must be connected to the network.
• The FTP server must be enabled at the Switched Rack PDU.
• The Switched Rack PDU must have its TCP/IP settings (

, 

, and 

 addresses) configured.

To use FTP to upgrade the Rack PDU:

1. Open an MS-DOS command prompt window on a computer that is 

connected to the network. Go to the directory that contains the 
firmware upgrade files, and list the files. For the directory 

C:\apc

, the 

commands would be those shown in 

:

C:\>

C:\apc>

Files listed for a Switched Rack PDU, for example, might be the 
following:

–

apc_hw02_aos_264.bin

 

–

apc_hw02_app_266.bin

 

2. Open an FTP client session:

C:\apc>

3. Type 

open

 and the Switched Rack PDU’s IP address, and press 

E

NTER

. If 

the 

 setting for 

 in the 

 menu has changed from its 

default of 

, you must use the non-default value in the FTP command.

a. For some FTP clients, use a colon to add the port number to the end 

of the IP address.

b. For Windows FTP clients, separate the port number from the IP 

address by a space. For example, if the Rack PDU’s 

 setting has been changed from its default of 

, such as to