Black Box LPJ016A-TM 用户手册
724-746-5500 | blackbox.com
Page 40
724-746-5500 | blackbox.com
802.3af and 802.3at PoE Gigabit Injectors
Table B-1 (Continued). SNMP MIB.
OID
Name
Type
Value
Description
2.3.6.1.4.1.24852.2.4.1.1.1~24
poeTrapsControlGroupIndex INTEGER
Not-accessible Uniquely describes the
(0.65535)
group the trap control is
located.
located.
2.3.6.1.4.1.24852.2.4.1.2.1~24
porTrapsControlEnable
INTEGER
Trapsdisabled(1) Enables and disables the
TrapsEnabled(2) trap from the agent.
OID
Name
Type
Description
2.3.6.1.4.1.24852.2.5.1
poePortHWFailTrap
NOTIFICATION Hardware failure trap.
2.3.6.1.4.1.24852.2.5.2
poePortPeakOverCurrentTrap NOTIFICATION Peak overcurrent trap.
2.3.6.1.4.1.24852.2.5.3
poePortOverloadTrap
NOTIFICATION Overload trap.
2.3.6.1.4.1.24852.2.5.4
poePortDiscoveryFailTrap
NOTIFICATION Discovery failure trap.
2.3.6.1.4.1.24852.2.5.6
poePortDisconnectTrap
NOTIFICATION Port disconnect trap.
2.3.6.1.4.1.24852.2.5.7
poePortVoltageFailTrap
NOTIFICATION Port voltage fail trap.
The Ethernet interface that the PoE Gigabit Injector performs under is TCP/IP, UDP port of 161. UDP port 161 for SNMP is an offi-
cial IANA registered EDP port number. While attempting to connect to the Ethernet interface PoE Gigabit Injector via a different
network domain, you must acknowledge that the local network supports the UDP port 161.
cial IANA registered EDP port number. While attempting to connect to the Ethernet interface PoE Gigabit Injector via a different
network domain, you must acknowledge that the local network supports the UDP port 161.
Different Network Domain
Building #2 Network Domain
254.168.2.xxx
Building #1 Network Domain
192.168.xxx
Network Domain
3rd floor 192.168.xxx
2nd floor 192.168.2.xxx
1st floor 192.168.1.xxx
Figure B-1. Network Domain Diagram.