Fujitsu PDS4203W-H / PDS4203E-H 用户手册
![Fujitsu](https://files.manualsbrain.com/attachments/6c4642b33d2edbd09f94719c20a133aa0e862902/common/fit/150/50/80a45702a21fefb1823bce6851e87db450dccf7792cb572ebc8a90330a68/brand_logo.png)
1 2
Power switch
• When pressed, power lamp
➀
lights red, and the power
can be turned on or off by the remote controller. When
this switch is pressed again, the power is cut and
power lamp
➀
goes off.
Power input terminal
• Firmly insert the accessory power cord as far as it will
go into the power input terminal.
• Firmly push the power cord plug as far as it will go
into the power socket. (100–240 VAC)
Video input terminal (VIDEO INPUT)
• Connects to the video output terminal of a video deck
or video disc player.
S video input terminal (S-VIDEO INPUT)
• Connects to the S video output terminal of a video
deck or video disc player.
Component video input terminal (COMPONENT
VIDEO INPUT)
• Connects to the component video output terminal of
DVD and similar devices.
RGB input terminal (RGB INPUT)
• Connects to the computer monitor's (analog RGB)
output terminal.
Cables connecting the personal computer vary ac-
cording to the type of machine, so consult your prod-
uct dealer.
RS-232C input terminal (RS-232C)
• Connects to the computer RS-232C output terminal.
Audio input terminals (AUDIO INPUT)
• Connects to the audio output terminal of a video deck
or similar device.
Sync switch (SYNC SW TTL/ANALOG (75
Ω
)
• For switching the RGB terminals' 13-pin horizontal
sync and 14-pin vertical sync to terminate with 75
Ω
.
When an analog synchronous signal is input at the
RGB terminal, be sure that this switch is set to ANA-
LOG (75
Ω
). For connection to a personal computer,
be sure it is set to TTL.
NAMES OF PARTS AND THEIR FUNCTIONS
Rear view