Microsoft mainboard 用户手册

 

11 

 

Note:  The pin -1 corner is marked with an arrow 

 

Follow these instructions to install the CPU: 

1. 

Pull the CPU socket locking lever away from the socket to unhook it and raise 
the locking lever to the upright position. 

2. 

Identify the pin Pin-1 corner 
on the CPU socket and the 
pin Pin-1 corner on the 
processor. 

 

3. 

Match the Pin-1 corners and insert the processor into the socket. Do not use 
force. 

4. 

Swing the locking lever down and hook it under the latch on the edge of the 
socket. 

5. 

Apply thermal grease to the top of the CPU. 

6. 

Lower the CPU fan/heatsink unit onto the CPU and CPU socket and then snap 
then snap the fan/heatsink into place. 

7. 

Plug the CPU fan power cable into the CPU cooling fan power supply on the 
mainboard (CPUFAN). 

The mainboard has two 168-pin/184-pin DIMM sockets for SDRAM/DDR 
(Double Data Rate) SDRAM system memory modules.