Microsoft mainboard 用户手册

 

28 

If you select this item and press Enter a dialog box appears. If you press Y, 
and then Enter, the Setup Utility loads a set of fail-safe default values. These 
default values are not very demanding and they should allow your system to 
function with most kinds of hardware and memory chips. 

Note:   It is highly recommended that users enter this option to load optimal val-

ues for accessing the best performance.   

If you select this item and press Enter a dialog box appears. If you press Y, 
and then Enter, the Setup Utility loads a set of best-performance default val-
ues. These default values are quite demanding and your system might not 
function properly if you are using slower memory chips or other low-
performance components. 

This page sets some of the parameters for peripheral devices connected to 
the system.  

Use this item to enable or disable the onboard floppy disk drive interface. 

Use these items to enable or disable the onboard COM1/2 serial port, and to 
assign a port address.  

Use this item to allocate the resources of the second serial port. Under Nor-
mal, the resources are allocated to the onboard serial port. Under ASKIR or 
IrDA, the resources are allocated to the onboard IR port.