National Instruments PCI 用户手册
Chapter 2
PCI Serial Hardware Installation, Verification, and Configuration
2-4
ni.com
Verify the Installation
To verify the hardware and software installation, complete the following
steps:
steps:
1.
Select Start»Settings»Control Panel and double-click on the
System icon.
System icon.
2.
Click on the Hardware tab and click on the Device Manager button.
3.
Double-click on the Ports (COM & LPT) icon to display all of
the ports.
the ports.
4.
Double-click on the Multi-function adapters icon.
The PCI serial boards are configured as devices belonging to the
multi-function adapters class. The multi-function parent device is
listed under the Multi-function adapters icon, and each child device
is listed as a port under the Ports (COM & LPT) icon.
multi-function adapters class. The multi-function parent device is
listed under the Multi-function adapters icon, and each child device
is listed as a port under the Ports (COM & LPT) icon.
Figure 2-2 shows the Device Manager tab for serial hardware that is
installed properly.
installed properly.
Figure 2-2. Device Manager for PCI Serial Board Ports