National Instruments PCI 用户手册
Chapter 2
PCI Serial Hardware Installation, Verification, and Configuration
© National Instruments Corporation
2-13
Figure 2-6 shows the Device Manager tab for serial hardware that is
installed properly.
installed properly.
Figure 2-6. Device Manager Tab for PCI Serial Board Ports
5.
Verify the hardware resources, as follows:
a.
In the Device Manager tab, under Multi-function adapters,
double-click on a serial board.
double-click on a serial board.
b.
Click on the Resources tab. If the resources were assigned
properly, the Resources tab shows which resources are assigned
to your serial ports.
properly, the Resources tab shows which resources are assigned
to your serial ports.
c.
Repeat steps 5a and 5b until you have verified the resources for
each board.
each board.