Cisco Systems IAD2430 用户手册

Verify that a suitable AC power outlet is available.

Do not plug this unit into an AC outlet that does not have a UL-certified receptacle that is properly tied 
into the building ground.

Place the four rubber feet (from the accessory kit) in the four indentations on the underside of the chassis. 
This helps provide proper airflow through and around the chassis.

Place the Cisco IAD on the desktop.

Do not place anything on top of the chassis that weighs more than 10 lb (4.5 kg). Excessive weight on 
top can damage the chassis.

You can place Cisco IAD2435 on a desktop.

Do not place anything on top of the router that weighs more than 5 pounds (2.25 kg), and do not stack 
routers on a desktop. Excessive distributed weight of more than 5 pounds, or pound point load of 5 
pounds on top could damage the chassis.

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the 
absence of a suitably installed ground conductor. Contact the appropriate electrical inspection 
authority or an electrician if you are uncertain that suitable grounding is available. Statement 1024

AC connected units must have a permanent ground connection in addition to the power cable ground 
wire. NEBS-compliant grounding satisfies this requirement. Statement 284

This equipment needs to be grounded. Use a green and yellow 12 to 14 AWG ground wire to connect 
the host to earth ground during normal use. Statement 242