Cisco Systems IAD2430 用户手册

Cisco IAD2430 series IADs can be installed with optional backup power. Backup power to a 
DC-powered IAD is provided by a battery backup system; see the 

 section for connection instructions. Backup power to an 

AC-powered IAD is provided by an uninterruptible power supply (UPS); see the 

 

for connection instructions.

UPS functionality is not available on the IAD2435 IAD.

The Cisco IAD2430 series IAD chassis provides inputs for both AC and DC power. Design your 
installation to use only one type of power. Do not use AC and DC power at the same time. If you do, the 
unit stops operating, and you must reboot it with only a single power source.

See 

 for the maximum power requirements for each Cisco IAD2430 IAD model. 

Connect a 12-volt backup battery to the DC input connector on your Cisco IAD2430 series router. 
Before you install a backup battery, be sure to read the installation instructions for the backup battery 
equipment.

 shows a setup using an external backup battery.

 shows one possible setup; please review your backup battery documentation before you set 

up your system.

IAD2431-8FX

50

IAD2431-16FXS

60

IAD2432-24FXS

70

IAD2431-1T1E1(no FXS analog 
ports)

35

IAD2430-24FXS (no TI/E1or 
WIC slot)

60

IAD2435-8FXS (no WIC slot)

60