Cisco Systems IAD2430 用户手册

Enter your selection [2]: 2

Building configuration...

Use the enabled mode 'configure' command to modify this configuration.

Press RETURN to get started! RETURN

The user prompt is displayed.

Router>

Verify the initial configuration. See the 

 

for verification procedures.

To configure the Cisco IAD from a console (locally or remotely), see the 

 for the configuration instructions. To configure it remotely through Telnet, 

continue to the 

 to set a Fast Ethernet 

(100BASE-T) port IP address.

For information about obtaining any referenced documentation, see the 

This section shows how to prepare the Cisco IAD to perform basic communication functions through its 
10/100BASE-T and WAN interfaces.

Perform the following initial configuration procedures, as applicable:

Gather the following information, as applicable, before you begin the configuration process:

For 10/100BASE-T ports: IP address

For T1/E1 ports: clock source, framing, line code, cable length

To configure the Cisco IAD remotely through a Fast Ethernet connection, connect the 10/100BASE-T 
port to a live Ethernet connection by using a standard Ethernet cable with RJ-45 connectors. Then 
complete this procedure to set the IP address for the port. After setting the address, you can configure the 

 

Cisco IAD remotely through a Telnet connection.