Cisco Systems 2500 用户手册
34
Step 2
The CLI displays the root level system prompt:
#(system prompt)>
The system prompt can be any alphanumeric string up to 31 characters. You can change it by
entering the config prompt command. For example, to change the system prompt to
CISCO2504, enter config prompt "CISCO2504" and press Enter. Make sure you enter the
new prompt using double quotation marks.
entering the config prompt command. For example, to change the system prompt to
CISCO2504, enter config prompt "CISCO2504" and press Enter. Make sure you enter the
new prompt using double quotation marks.
Note
The CLI automatically logs out without saving any changes after 5 minutes of
inactivity. You can set the automatic logout from 0 (never log out) to 160 minutes
using the config serial timeout command.
inactivity. You can set the automatic logout from 0 (never log out) to 160 minutes
using the config serial timeout command.
6
Connecting to the Network
connection uses 10/100/1000BASE-T Ethernet (RJ-45 physical port, UTP, Category-5 or higher cable).
Always use Category-5, Category-5e, Category-6, or Category-7 Ethernet cables to connect the office
network equipment to the controller.
Always use Category-5, Category-5e, Category-6, or Category-7 Ethernet cables to connect the office
network equipment to the controller.
Figure 13
External Network Equipment Connection to the Controller
282298
Network
Firewall
Connection to
main office
10/100/1000BASE-T
MDI cable
CLI console
Cisco
Access Points
10/100/1000BASE-T
MDI cable
Office
network