Black Box ACX160 用户手册

Page 39

724-746-5500 | blackbox.com

Chapter 3: Installation

3. Installation

3.1 System Setup

NOTE: If you are a first-time user, we recommend that you set up the system

in the same room as a test setup. This will allow you to identify and solve
any cabling problems, and experiment with your system more conveniently.

Setup of the ServSwitch DKM FX

1. Install the CPU and I/O boards.

2. Connect the keyboard, mouse, and monitor to the CPU board of the

ServSwitch DKM FX.

3. Connect the ServSwitch DKM FX to the power supply.

4. Open OSD via hotkey and log in with administrator rights in the main menu

under configuration (see Section 4.2.1).

5. Configure initially as requested.

NOTE: After configuring the system, we recommend that you save the

configuration by selecting Configuration > Save and restart the ServSwitch
DKM FX by selecting Restart Matrix.

6. Optional: Establish a network connection between the ServSwitch DKM FX and

the Java tool to set an extended configuration (see Section 4.2.2).

Setup of Extender

1. Connect the CON units to the ServSwitch DKM FX by using the interconnect

cables (CATx or fiber).

2. Connect the CON units to the input devices to be used (for example, keyboard

and mouse).

3. Connect the 5-VDC power supply units to the CON units.

4. Check the basic function of the CON unit by opening the OSD via hotkey.

5. Connect the source (computer, CPU) to the CPU unit of the extender by using

the provided connection cables.

6. Connect the CPU unit to the ServSwitch DKM FX by using the provided

interconnect cables (CATx or fiber).