Soyo sy-7isa+ 用户手册

SY-7ISA+ 

2-3.5 Voice Doctor 
If the system does not boot-up properly, the Voice Doctor will 
inform the user by voice through internal/external speaker at 
what point in boot-up sequence the problem arises. 
Below are the possible errors the user may encounter: 
1.  The Processor might be damage or not installed properly 
2.  The memory module might be damage or not installed 

properly 

3. No 

Keyboard 

connected 

4.  VGA card might be damage or not inserted properly 
5.  Defective HD-Driver (IDE) 
6.  Floppy might have an error 
Voice Doctor supports two language, refer the table below on the 
language you prefer. 

2-3.6 CMOS Clear (JP5) 
In some cases the CMOS memory may contain wrong data, follow the 
steps below to the clear CMOS memory. 
1. 

Clear the CMOS memory by momentarily shorting pin 2-3 on jumper 
JP5. This jumper can be easily identified by its white colored cap.   

2. 

Then put the jumper back to 1-2 to allow writing of new data into the 
CMOS memory. 

Short pin 2-3 for 

at least 5 seconds 

to clear the CMOS

Short pin 1-2 
to retain new 

settings 

1 2 3

1 2 3

1 2 3

1 2 3