Sun Microsystems 60 用户手册

8-4

Sun Ultra 60 Service Manual • August 2001

FIGURE 8-2

Removing and Replacing the Power Supply (Part 2 of 2)

g. Slide the power supply toward the chassis front until the power supply rear

panel is flush with the chassis.

h. Using a number 2 Phillips-head screwdriver, tighten the captive screws

securing the power supply to the chassis.

Note –

Tighten the captive screws in a clockwise order beginning with the upper

right captive screw.

2. Connect the AC power cord.

3. Detach the wrist strap.

4. Replace the side access cover.

5. Power on the system unit.

See Section 6.1, “Powering On the System Unit” on page 6-2.

Power cable