Sun Microsystems 60 用户手册

8-14

Sun Ultra 60 Service Manual • August 2001

e. Replace the drive tray.

See Section 9.2.6, “Replacing the RMA” on page 9-9.

3. Connect the AC power cord.

4. Detach the wrist strap.

5. Replace the side access cover.

6. Power on the system unit.

See Section 6.1, “Powering On the System Unit” on page 6-2.

8.5

EMI Filler Panels

To remove and replace the EMI filler panels from the front bezel or the drive tray,
proceed as follows.

8.5.1

Removing an EMI Filler Panel

1. Identify the EMI filler panel to be removed.

2. Remove an EMI filler panel as follows (

FIGURE 8-5

a. Remove the front bezel.

b. Use your finger to pop the EMI filler panel from the bezel.

3. Remove the drive tray drive.

See Section 9.2.1, “Removing the RMA” on page 9-4.

4. Use your fingers to pop the drive tray EMI filler panel from the drive tray