Sun Microsystems 60 用户手册
Chapter 8
Major Subassemblies
8-29
9. Disconnect the DC switch assembly power connector from motherboard connector
J3504 (
FIGURE 8-18
DC Switch Assembly Cable Routing
10. Remove the DC switch assembly power cable from the cable routing clips.
11. Remove the front panel (
):
a. Remove the front panel bezel.
b. Remove the front panel nameplate and light pipe.
c. Using a number 2 Phillips-head screwdriver, remove the four screws securing
the front panel to the chassis.
d. Remove the front panel from the chassis.
DC power connector
J3504
DC power cable routing