Sun Microsystems 60 用户手册
Chapter 4
Troubleshooting Procedures
4-15
5. At the OBDiag menu prompt
,
type
15
to enable toggle script-debug messages.
4.7.1
PCI/Cheerio
The PCI/Cheerio diagnostic performs the following:
1.
vendor_ID_test
– Verifies the Cheerio ASIC vendor ID is 108e.
2.
device_ID_test
– Verifies the Cheerio ASIC device ID is 1000.
3.
mixmode_read
– Verifies the PCI configuration space is accessible as
half-word bytes by reading the EBus2 vendor ID address.
4.
e2_class_test
– Verifies the address class code. Address class codes include
bridge device (0 x B, 0 x 6), other bridge device (0 x A and 0 x 80), and
programmable interface (0 x 9 and 0 x 0).
programmable interface (0 x 9 and 0 x 0).
5.
status_reg_walk1
– Performs walk-one test on status register with mask
0 x 280 (Cheerio ASIC is accepting fast back-to-back transactions, DEVSEL timing
is 0 x 1).
is 0 x 1).
6.
line_size_walk1
– Performs tests 1 through 5.
7.
latency_walk1
– Performs walk one test on latency timer.
8.
line_walk1
– Performs walk one test on interrupt line.
9.
pin_test
– Verifies interrupt pin is logic-level high (1) after reset.
identifies the PCI
/
Cheerio output message.
CODE EXAMPLE 4-9
PCI/Cheerio Output Message
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===> 0
TEST=’all_pci/cheerio_test’
SUBTEST=’vendor_id_test’
SUBTEST=’device_id_test’
SUBTEST=’mixmode_read’
SUBTEST=’e2_class_test’
SUBTEST=’status_reg_walk1’
SUBTEST=’line_size_walk1’
SUBTEST=’latency_walk1’
SUBTEST=’line_walk1’
SUBTEST=’pin_test’
Enter (0-12 tests, 13 -Quit, 14 -Menu) ===>