TANDBERG MCU 4500 用户手册
142
The default route is configured automatically in correspondence with the default gateway preference field (see
) and cannot be deleted. Any packets not covered by manually configured routes will be routed according
to this route.
Manually configured routes may be deleted by selecting the appropriate checkbox and clicking
.
If the default gateway preference is set to Port B and that port is disabled, the default route will be updated
automatically to route packets not covered by any manually configured route via Port A.
automatically to route packets not covered by any manually configured route via Port A.
If a manually configured route specifies Port B and that port is disabled, packets matching that route
be
automatically routed via Port A, but discarded. You should take care to avoid this situation.
This table shows the current default gateway and name server(s) for Ethernet Ports A and B. No fields can be
changed, and are provided for reference when configuring the other parameters described in the sections above.
changed, and are provided for reference when configuring the other parameters described in the sections above.