IMC Networks McPc-Gigabit 用户手册
1
About the McPC-Gigabit
The McPC-Gigabit is a low-cost, IEEE 802.3 single-conversion, PC Card media
converter that converts 1000Base-TX twisted pair to 1000Base-SX multi-mode or
1000Base-LX single-mode fiber. The McPC-Gigabit is available with one RJ-45
connector for the twisted pair port and a SC connector for the fiber port.
converter that converts 1000Base-TX twisted pair to 1000Base-SX multi-mode or
1000Base-LX single-mode fiber. The McPC-Gigabit is available with one RJ-45
connector for the twisted pair port and a SC connector for the fiber port.
The McPC-Gigabit is also available for single-strand which allows two individual
channels to share one strand of fiber; Full-Duplex data travels on different
wavelengths— 1310 nm and 1550 nm.
channels to share one strand of fiber; Full-Duplex data travels on different
wavelengths— 1310 nm and 1550 nm.
The McPC-Gigabit can be mounted into any PC with a standard PCI and includes
diagnostic LEDs for each port.
diagnostic LEDs for each port.
Installing the McPC-Gigabit
Offering plug-and-play operation, the McPC-Gigabit comes ready to install, utilizing
power from the PC’s motherboard. To install the McPC-Gigabit:
power from the PC’s motherboard. To install the McPC-Gigabit:
1. Turn off the PC
2. Remove its cover
3. Find an empty PCI slot
4. Align the McPC-Gigabit in the slot
5. Screw the McPC-Gigabit into the computer casing’s bracket
6. Make sure the McPC-Gigabit does not extend past the edge of the case
7. Attach the keyed mini-power connector to the McPC-Gigabit
8. Attach the male end of the “Y” connector to one of the computer’s standard size
2. Remove its cover
3. Find an empty PCI slot
4. Align the McPC-Gigabit in the slot
5. Screw the McPC-Gigabit into the computer casing’s bracket
6. Make sure the McPC-Gigabit does not extend past the edge of the case
7. Attach the keyed mini-power connector to the McPC-Gigabit
8. Attach the male end of the “Y” connector to one of the computer’s standard size
power connectors
9. Replace the cover
10. Attach the cables between the McPC-Gigabit and the devices that will be
10. Attach the cables between the McPC-Gigabit and the devices that will be
connected
AutoCross
Whether you are using crossover or straight-through CAT5 twisted pair cabling,
McPC-Gigabit will support both types of connections with AutoCross, a feature which
automatically selects between a crossover workstation or Pass-Through connection
depending on the connected device.
McPC-Gigabit will support both types of connections with AutoCross, a feature which
automatically selects between a crossover workstation or Pass-Through connection
depending on the connected device.
FX
TX