Philips 5.1 用户手册

Philips Sound Solutions 

Selecting the HI-SR (High Sample Rate) button will enable 96KHz sample rate for both input and 
output from the Ultimate Edge. When you enable HI-SR on the Ultimate Edge: 

- 

Input streams are sampled at 96kHz and processed by PSA2 HD at that rate. 
PSA2 HD output may then be converted to a lower rate if required by the recording 
program. 

- 

Output streams lower than 96kHz will be converted to 96kHz.  

 

NOTE: In order to use this feature over S/PDIF output, please make sure that you have a 96KHz 
capable decoder. Failure in providing a 96KHz capable decoder with this feature enabled may 
result in no sound or garbled playback.  
 

Enable this button to monitor the playback from the analog inputs (CD In, Line In, Mic In, and Aux 
In) during recording. Enabling this button will enable Front Speakers or Headphones button or 
All Available Speakers and Outputs with Effects (QMSS) button to be selected.  
 

Enable this button to monitor the analog inputs over front speakers or headphones (stereo). 

Enable this button to monitor the analog inputs over the current speaker configuration. 

Enabling 

this button will also activate the 3D Effects function.

 

Be aware that PSA2 HD effects are not 

applied to any recording made. 
NOTE: Please check the Troubleshooting section if you are having problem with microphone 
feedback during the recording.