Samsung 164BX 用户手册
8–2
Troubleshooting
Beep Codes
3. Replace the keyboard.
Note:
If you have the network drivers installed, but do not have the AlphaPC
164UX connected to a network, there will be a noticable increase in the
time it takes for NT to start-up after the login. This is caused by the net-
work drivers having to wait for a time out.
164UX connected to a network, there will be a noticable increase in the
time it takes for NT to start-up after the login. This is caused by the net-
work drivers having to wait for a time out.
8.2 Beep Codes
The beep codes provide error information about the AlphaPC 164UX system. Table
8–1 lists and describes the beep codes.
8–1 lists and describes the beep codes.
8.3 Post Codes
The post codes indicate the progress of the SROM and the ARCSBIOS firmware.
Table 8–2 lists and describes the post codes.
Table 8–2 lists and describes the post codes.
Table 8–1 Beep Codes
Beep Code
Description
1 Very long beep
No Fan. Shut down the system immediately.
1 Long, 1 short
Cannot measure CPU speed.
1 Long, 2 short
Invalid DIMM configuration
1 Long, 3 short
Cached Memory Error
1 Long, 4 short
Noncached Memory Error
1 Long, 5 short
SROM had bad checksum
1 Long, 6 short
PAL has bad checksum
1 Long, 7 short
Error copying FLASH to memory.Failed noncached verify
1 Long, 8 short
Error copying FLASH to memory.Failed refill from DIMM verify
1 Long, 9 short
Error copying FLASH to memory.Failed refill from Bcache verify
2 Long, 1 short
ARCSBIOS has bad checksum, will boot safe ARCSBIOS.
2 Long, 2 short
Safe ARCSBIOS has bad checksum
3 Long
No video
4 Long
No keyboard
Continuous
No Fan,shut down system immediately