Q-See QSDT8PCDP 用户手册

CHAPTER 5  BASIC OPERA

TION

When you launch the SuperDVR program, it will open to the 

Main Display Interface which 

will show the video feeds from the cameras as well as the 

Display Control Panel. 

CHAPTER 5

The Display Control Panel includes the Display Mode buttons along with buttons which allow 
you to cycle automatically or manually through individual or groups of channels. 

1

Display Window

2

Record Status Panel

3

Display Modes

4

Display Control Panel

5

Dwell Time

6

Page Flip

7

Drive Capacity Indicator Bar

8

Snapshot

9

Urgent Record

10

Date and Time

11

Login

12

Emap

13

Search and Playback

14

Configurations

15

PTZ Control

16

Exit

Choose the number of channels you wish to view simultaneously. If you have fewer cameras 
than portions of the screen, those channels without cameras will remain black.
Available modes are single-, four-, nine-. 16- 
and 36-screen displays. The software will only 
display the modes appropriate to the number 
of cameras you have connected.

 

If the 

Main Display is currently showing fewer channels than are available, you can have the 

DVR automatically cycle through and show the feed from each camera or group of cameras 
by selecting the button. 

 

This button allows you to manually cycle through the channels. Like the Auto Dwell feature, if 
there are more channels available than are currently being displayed in a multi-screen display 
mode, this button will take you to the next group of video feeds.

Log In will be covered in the following section and the remaining operations on the left 
hand side of the 

Main Display Interface will be covered in Chapter 7. The two remaining 

functions are 

Snapshot and Urgent Record.

Usable in single image display mode, pressing this button will take a series of still images 
from the camera currently being displayed and will save them to a location on the hard drive. 
Settings to determine the number of images (up to 32) as well as the location to where they 
will be saved will be covered in Chapter 6.

Clicking the Urgent Record icon will cause all cameras to begin recording regardless of their 
schedule or recording mode. Video will be saved to the location designated by the user. Like 
Snapshot, the settings for this feature will be covered in Chapter 6.

Buttons currently in effect are highlighted. 
The Drive Capacity Indicator Bar will fill in as 
more files are recorded to the drive. When the 
drive is at capacity, the bar will be red.

Located on the left side of the 

Interface, clicking on the lock icon will open 
the 

Login window. Enter your user name and 

password to access the controls. The default 
user name is 

System with no password 

required. You can add a password and create 
other user accounts as described in Section 
7.4 User Configuration.