Rosewill RNX-N360PC 用户手册

 

22

Adapter uses. The channels available depend on the regulatory domain. If the 
adapter finds no other ad hoc adapters, the channel that the adapter starts the ad hoc 
network with will be selected automatically. The Adapter must match the wireless 
mode and channel of the clients it associates. 

¾

  802.11 Authentication Mode: Select which mode the Adapter uses to authenticate 

to an access point: 

• 

Auto causes the adapter to attempt authentication using shared, but switches it 
to open authentication if shared fails. 

• 

Open enables an adapter to attempt authentication regardless of its WEP 
settings. It will only associate with the access point if the WEP keys on both the 
adapter and the access point match. 

• 

Shared only allows the adapter to associate with access points that have the 
same WEP key. 

For infrastructure (Access Point) networks, click Preferred APs… to specify four access 
points at most to the client adapter that attempts to be associated to the access points. 
The four access points have different priorities; the frontal has the higher priority. 

 

Figure 3-7 

1.  Go to the Profile Management tab (shown in Figure 3-2). 

2.  Select the profile name in the Profiles List. 

3. Click 

Remove. 

)

The profile being used can’t be removed. 

1.  Go to the Profile Management screen (shown in Figure 3-2). 
2.  Select the profile name required in the Profiles List. 
3. Click 

Activate.