Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-95
ANN-BD (Announcement Circuit Pack)
10
Note:
a. For a complete description of these tests, refer to the "XXX-BD (Common
Port Circuit Pack)" Maintenance documentation.
Angel-Speech Processor (SP) Handshake Test
(#208)
(#208)
This test checks the integrity of the communication link between the two
processors on the Announcement circuit pack. Failure of this test indicates that
the Speech Processor is insane and
processors on the Announcement circuit pack. Failure of this test indicates that
the Speech Processor is insane and
results in the loss of all integrated
announcements on the circuit pack.
1.
D = Destructive, ND = Non-destructive
SAKI Test (#53) (a)
X
D
Table 10-34.
TEST #208 Angel-Speech Processor (SP) Handshake Test
Error
Code
Code
Test
Result
Description/ Recommendation
2000
ABORT
Response to the test request was not received within the allowable time
period. If Error Type 1538 is present in the Error Log, follow the
maintenance strategy recommended for this Error Type.
period. If Error Type 1538 is present in the Error Log, follow the
maintenance strategy recommended for this Error Type.
2100
ABORT
Could not allocate the necessary system resources to run this test.
ABORT
Internal System Error.
1. Retry the command at one-minute intervals a maximum of five times.
Continued on next page
Table 10-33.
System Technician-Demanded Tests: ANN-BD —
Continued
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Reset
Board
Sequence
D/ND
1
Continued on next page