Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Routine Maintenance Procedures
Page 5-44
System Features
5
NOTE:
The Feature Access Code (FAC) is administered on the Feature
Access Codes Form. The 197 FAC code used here is an example.
Access Codes Form. The 197 FAC code used here is an example.
2. Dial port network number (1 for PPN or 2 or 3 for EPN), then dial
**
and
listen for the following tones:
■
Confirmation Tone—Connection is made. Go to Step 3.
■
Reorder Tone—No time slots are out-of-service.
3. Repeat from Step 1 to alternate between out-of-service time slots on TDM
Bus A and B.
System Tone Test Call
The system tone test call connects the voice terminal user to a specific system
tone.
tone.
To place the call:
1. Dial the Facility Test Call Feature Access Code (for instance, 197, see
Note), and listen for dial tone.
NOTE:
The Facility Test Call Access Code (FAC) is administered on the
Feature Access Codes Form. The 197 FAC code used here is an
example.
Feature Access Codes Form. The 197 FAC code used here is an
example.
2. Dial port network number (1 for PPN or 2 or 3 for EPN), then dial
*
followed
by the two-digit tone identification number listed in
.
3. Listen for the tone that was specified.
NOTE:
For a definition of Call Progress Tones see
DEFINITY Enterprise
Communications Server Release 5.4 System Descriptions and
Specifications
Specifications
.
Table 5-3.
System Tone Identification Numbers
Number
Description
00
Null tone
01
Dial tone
02
Reorder tone
03
Alert tone
04
Busy tone
Continued on next page