Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1366
TAPE (Tape Unit) [G3iV1.1-286]
10
How to Use Table B to Determine Aux Data
Values
Values
In this table, the numbers can have one to five digits. If the first or leftmost digit is
"1," the number has five digits. If the first digit or leftmost digit is "2," the number
has four digits. If the first or leftmost digit is "3," the number has three digits. If the
first or leftmost digit is "4," the number has two digits. If the first or leftmost digit is
"1," the number has five digits. If the first digit or leftmost digit is "2," the number
has four digits. If the first or leftmost digit is "3," the number has three digits. If the
first or leftmost digit is "4," the number has two digits. If the first or leftmost digit is
9033
Inability to write a
significant portion of the
scratch area on the tape.
significant portion of the
scratch area on the tape.
1. Follow the steps provided in the
section.
2. If problem still exists then escalate.
9034
Inability to both read and
write a significant portion
of the scratch area on the
tape.
write a significant portion
of the scratch area on the
tape.
1. Follow the steps provided in the
section.
2. If problem still exists then escalate.
Table 10-415.
Table A: Tape Unit Aux Data Table —
Continued
Aux Data/
Error Codes
Explanation
Strategy
Continued on next page