Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-1544
UDS1-BD (UDS1 Interface Circuit Pack)
10
NPE Connection Audit Test (#50)
The system sends a message to the on-board microprocessor to update the
network connectivity translation for the SCOTCH-NPE chip on the circuit pack.
network connectivity translation for the SCOTCH-NPE chip on the circuit pack.
Table 10-456.
TEST #50 NPE Connection Audit Test
Error
Code
Test
Result
Description/ Recommendation
None
2100
2100
ABORT
System resources required for this test are not available.
1. Retry the command at 1-minute intervals a maximum
of 5 times.
2. If the test continues to abort, escalate the problem.
1019
ABORT
The test aborted because a test was already running on
the port.
the port.
1. Retry the command at 1 minute intervals for a
maximum of 5 times.
2. If the test continues to abort, escalate the problem.
FAIL
Internal System Error
1. Retry the command at 1-minute intervals a maximum
of 5 times.
2. If the test continues to abort/fail, escalate the
problem.
PASS
The circuit pack’s SCOTCH-NPE chip have been
updated with its translation.
updated with its translation.
Continued on next page