Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-223
list mst
8
0x72 - Time changed while trace enabled
timestamp indication:
0x00 - MST timestamp is old time
0x01 - MST timestamp is new time
0x01 - MST timestamp is new time
X.25 Application Data
The processor channel number is the R1/R3 term, and R2 calls it the port
number. The processor channel number is equal to the Application port number
in R1. In R3, the processor channel admin screen should be inspected to
determine the mapping.
number. The processor channel number is equal to the Application port number
in R1. In R3, the processor channel admin screen should be inspected to
determine the mapping.
0xA0 - X.25 outgoing application message
In abbreviated mode, the application message is not saved.
0xA1 - X.25 incoming application message
In abbreviated mode, the application message is not saved.
1.
Application messages will contain the session
layer data headers and the data.
layer data headers and the data.
Message[1]
= 0x00
Message[2]
= timestamp indication
Message[1]
= processor channel number
Message[2]
= sequence number
Message[3]
= buffer id
Message[4]
= 0x00
Message[5+]
= application message
1
Message[1]
= processor channel number
Message[2]
= sequence number
Message[3+]
= application message