Lucent Technologies R5SI 用户手册

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-271

release access-endpoint 

If the standby is currently entering maintenance mode, then the following will be 
displayed:

 Cannot interrupt Standby SPE while entering 

maintenance mode; please try later

If the standby is busy with another task, then the following will be displayed:

 Standby SPE not available; for information use "status 

system"

If the standby is in the process of doing a software upgrade, then the following 
will be displayed:

 Standby SPE upgrade in progress, command denied

The refresh command is not allowed while the standby SPE is being brought out 
of standby mode into maintenance mode. Once fully in maintenance mode, 
however, the command can be executed.

This command will release a specified access endpoint.

release access-endpoint extension

The following default logins may execute this command: system technician, 
inads, init, nms.

The release access endpoint command will remove all ports associated with the 
specified access endpoint from a maintenance busy state. Periodic and 
scheduled tests will resume on the released ports. Maintenance will do 
background initialization testing on the released ports. For details of the test 
sequence, refer to [3].