Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-284
release link
8
release link
This command will release the system technician specified link.
Synopsis
release link link-id
Permissions
The following default logins may execute this command: system technician,
inads, init.
inads, init.
Examples
release link 1
release link 8
release link 8
Description
The release link command puts the MOs associated with a specified link into
service. Some tests execute on the hardware to verify functioning equipment.
service. Some tests execute on the hardware to verify functioning equipment.
Defaults
None.
Parameters
Help Messages
If the system technician presses
HELP
after entering "release link," the following
message will be displayed:
Enter 1 character link number
Error Messages
If the link identifier is not valid, the following error message is displayed:
Link out of range, please press
HELP
If the link is not administered, the following error message is displayed:
link-id
The link-id is a number associated with each link between 1-8. Link 1
through 4 reside on Processor Interface circuit pack "1a1" or "1b1" and
5 through 8 reside on Processor Interface circuit pack "1a2" or "1b2."
through 4 reside on Processor Interface circuit pack "1a1" or "1b1" and
5 through 8 reside on Processor Interface circuit pack "1a2" or "1b2."