Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Commands and Trouble-Clearing Aids
Page 8-285
release link
8
Link not administered or not enabled
If the command entered is in conflict with another currently executing command,
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
then a message will be displayed showing the login id of the conflicting user and
the conflicting command. The message is as follows:
’login id’:’command’ has a command conflict
If during the execution of a command a resource problem occurs that requires
the user to restart the command, then the following message is displayed:
the user to restart the command, then the following message is displayed:
Command resources busy; Press CANCEL to clear, and then
resubmit
If all of the available maintenance resources are currently in use, then the
following message is displayed:
following message is displayed:
All maintenance resources busy; try again later
Output
For the following output example, assume that the command that was entered is
"release link 1."
"release link 1."
Feature Interactions
None.
Port
The port address (cabinet-carrier-slot-circuit) of the maintenance
object that is being busied out or released. With this command
the Port address represents the link-id.
object that is being busied out or released. With this command
the Port address represents the link-id.
Maintenance Name
The type of maintenance object that is being released.
Alt. Name
Not applicable.
Result
"PASS," "ABORT," "FAIL."
Error Code
A system-generated number that tells why the release failed or
aborted. A detailed list of the codes can be found in the
"Busyout/Release Commands" section of this chapter.
aborted. A detailed list of the codes can be found in the
"Busyout/Release Commands" section of this chapter.
release link 1
COMMAND RESULTS
Port Maintenance Name Alt. Name Result Error Code
01C0301 PI-LINK PASS
01C0301 PI-LINK PASS
Command successfully completed