Lucent Technologies R5SI 用户手册

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-506

status station 

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy; 

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

Type

The administered station type.

Extension

The extension of the station or attendant to be displayed.

Port

The port location of the station (cabinet-carrier-slot-circuit).

Call Park

Whether the station has a call parked ("yes" or "no").

Ring Cut Off Activated

Whether ring cut off is activated ("yes" or "no").

CF Destination Ext

The call forwarding destination extension, if any.

Message Waiting

Whether there is a message waiting for the station. "AP-SPE", 
"AUDIX", "PMS" or blank if no messages are waiting.

Connected Ports

Port locations of the facilities to which the station is 
connected (cabinet-carrier-slot-circuit).

Agent Logged In

Displays (underneath it) the hunt groups (up to 3) that the 
agent is logged into.

On ACD Call?

Whether the agent is on an ACD call currently ("yes" or "no").

Work Mode

Work mode of each hunt group that an agent is logged into.

Service State

In service/on-hook, in service/off-hook, out of service, or 
disconnected.

Maintenance Busy State

Whether maintenance is testing the object ("yes" or "no").

SAC Activated

Whether send all calls is activated ("yes" or "no").

User Cntrl Restr

One or two of the following: "none", "total", "stat-stat", 
"outward" or "terminate".

Group Cntrl Restr

One or two of the following: "none", "total", "stat-stat", 
"outward" or "terminate".

AWU Call at

What time an automatic wakeup call is scheduled.