Lucent Technologies R5SI 用户手册

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-534

test access-endpoint 

Extension not assigned

If the object associated with the specified extension is not an access endpoint, 
the following message will be displayed:

Extension assigned to object

other than access-endpoint

If the board that contains the access endpoint is not inserted in the system, the 
following message will be displayed:

Board not inserted

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

The responses will be displayed on a port-by-port and test-by-test basis with one 
line of data displayed for each test result.

Port

The port address (cabinet-carrier-slot-circuit) of the maintenance 
object that is being tested.

Maintenance Name

The type of maintenance object that is being tested. For wideband 
access endpoint the maintenance name for each port is 
"WAE-PORT". For single port access endpoint the maintenance 
name is "TIE-DS1".

Alt. Name

The alternate way of identifying the maintenance object. This field 
contains the extension number of the access endpoint.

Test No

The actual test that is being executed.

Result

The result of the individual test -"PASS," "ABORT," "FAIL," "NO 
BOARD," "DISABLED."

Error Code

A system-generated number that tells why the test failed or 
aborted. A detailed list of the codes according to "Test No." is 
provided for each MO.