Lucent Technologies R5SI 用户手册

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-612

test link 

If the link has not been administered, then the following message is displayed:

Link not administered or not enabled

If there are no tests for the current MO, the following message is displayed:

No tests for this MO

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message is displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message is displayed:

All maintenance resources busy; try again later

The responses will be displayed on a test-by-test basis with one line of data 
displayed for each test result.

Following is an sample output for the command "test link 1 long".

Port

Port address on the Processor Interface board associated with 
the link-id being tested.

Maintenance Name

The type of maintenance object that is being tested.

Alt. Name

Not applicable.

Test No

The actual test that is being executed.

Result

The result of the individual test - "PASS", "ABORT", "FAIL," "NO 
BOARD," "DISABLED," "EXTRA BD."

Error Code

A system-generated number that tells why the test failed or 
aborted. A detailed list of the codes according to "Test No." is 
provided for each MO.