Lucent Technologies R5SI 用户手册
DEFINITY Enterprise Communications Server Release 5
Maintenance and Test for R5vs/si
Maintenance and Test for R5vs/si
555-230-123
Issue 1
April 1997
Maintenance Object Repair Procedures
Page 10-41
ADX16A-PT (AUDIX Analog Line/Control Link)
10
Note:
a. Retry the command at 1-minute intervals a maximum of 5 times
Conference Circuit Test (#7)
This test verifies that the NPE channel for the port being tested can correctly
perform the conferencing function.
perform the conferencing function.
PASS
The port is correctly using its allocated time slots. User-reported troubles
on this port should be investigated by using other port tests, by examining
station wiring, or by examining the station.
on this port should be investigated by using other port tests, by examining
station wiring, or by examining the station.
Table 10-17.
TEST #7 Conference Circuit Test
Error
Code
Test
Result
Description/Recommendation
ABORT
Could not allocate the necessary system resources to run this test. (a)
1000
ABORT
System resources required to run test are not available. The port may be busy
with a valid call. Use the
with a valid call. Use the
display port PCSSpp
command to determine the
station extension. Use the
status station
command to determine the service
state of the port. If the port is in use, wait until it is idle before retesting.(a)
1004
ABORT
The port was seized by a valid call during the test. The test has been aborted.
Use the
Use the
display port PCSSpp
command to determine the station extension.
Use the
status station
command to determine the service state of the port. If
the port is in use, wait until it is idle before testing. Try (a).
1018
ABORT
Test disabled by administration. This only applies to analog stations.
1. To enable the test for the analog station being tested, enter the
change
station <extension>
command and change the ‘‘Test?’’ field on the
Station Form from ‘‘n’’ to ‘‘y.’’
2000
ABORT
Response to the test request was not received within the allowable time period.
2100
ABORT
Could not allocate the necessary system resources for this test. Try (a).
Continued on next page
Table 10-16.
TEST #6 NPE Crosstalk Test —
Continued
Error
Code
Code
Test
Result
Description/ Recommendation
Continued on next page